Monday, April 20, 2009

Headsets

Headphones are a pair of small loudspeakers, or less commonly a single speaker, with a way of holding them close to a user's ears and a means of connecting them to a signal source such as an audio amplifier, radio or CD player. They are also known as earphones, earbuds, stereophones, headsets or, informally cans. In the context of telecommunication, the term headset is used to describe a combination of headphone and microphone used for two-way communication, for example with a telephone.

The telephone earpiece such as the one pictured at the right was common around the turn of the 20th century. From the earpiece developed the headphones. Sensitive headphones were the only way to listen to audio signals before amplifiers were developed. When used with early powered radios, the headphone was normally connected to the positive high voltage battery terminal, and the other battery terminal was securely earthed. The use of bare electrical connections meant that users could be shocked if they touched the bare headphone connections while adjusting an uncomfortable headset.

The housing, or earcup, of an earcup headphone will be either open or closed. Open headphones, sometimes marketed as “open air” headphones, have an open grille on the back of the earcup, exposing the driver to the outside and allowing sound waves to propagate away from the ear freely. This backing type does not isolate the listener from outside sounds; in addition, sound through open headphones can be heard by others in the vicinity of the user. They usually have less distortion due to the lack of earcup resonance. Closed headphones have a sealed backing, which attenuates sound waves propagating away from the ear. As a result, listeners away from the headphones cannot hear the produced sound easily. In addition, sound from outside is attenuated by the sealed backing, providing a level of isolation to the listener. A sealed chamber is often claimed to have the negative effect of distorting sound in certain frequencies due to resonances within the earcup housing, however, bass frequencies are stronger in a sealed chamber headphone design.

Headphones may be used to prevent other people from hearing the sound either for privacy or to prevent disturbance, as in listening in a public library. They can also provide a level of sound quality greater than loudspeakers of similar cost. Part of their ability to do so comes from the lack of any need to perform room correction treatments with headphones. High quality headphones can have an extremely flat low-frequency response down to 20 Hz within 3dB. However, rated frequency response distortion figures do not provide information on what character the sound reproduced at that frequency will be. Marketed claims such as 'frequency response 4 Hz to 20 kHz' are usually overstatements; the product's response at frequencies lower than 20 Hz is typically very small.

No comments:

Post a Comment